Great speakers equal top-notch sound.
But what if you only use 50% of your speakers’ capacity? What frequency response is good for speakers and can provide the best possible listening experience?
The best frequency response for speakers is from 20 Hz to 20 kHz because the human audio spectrum also shares this range.
Speakers should be able to produce sound in the same range.
When the audio equipment is within these limits, it is also known as the “full-range response.”
In a perfect scenario, the best speakers you could buy would have frequencies between 20 Hz and 20 kHz, but only some manufacturers are reliable and trustworthy.
Remember, the more popular the speakers are, the more you need to look into them.
If everyone’s enjoying them, there must be something that the company did right.
Frequency Response in Speakers
People need to know the term frequency response, what it means, and how it can help them buy the best speakers.
Before we go any further, I’d like to explain what frequency response actually is.
Maybe you have been browsing the Internet for speakers for a long time, or you just briefly visited the market; regardless, you have definitely stumbled upon a list of “frequency ranges” in the specifications of every model.
If a manufacturer doesn’t include the frequency range, you should probably find other speakers or, enquire.
Some companies don’t believe that frequency response is worth the testing it’s measured from.
They would rather rely on listening instinct to decide.
For response, a signal is registered and then played through when speakers register and extract a sound.
The initial input sound has to be within the boundaries of the speaker’s frequency range. Not a single sound will come out if it is outside the limit.
Humans also have a frequency range. We can hear all kinds of notes. The higher ones we call treble, and the low one’s bass.
The sound frequency range at which people can ideally register audio is between 20 Hz to 20,000 Hz, the same as the speakers.
So, is it even worth going for speakers outside this range? That’s an audiophile debate for another time.
Good frequency response for speakers
A good frequency response is just like a knife with two blades.
It can either make the sound system better or destroy it.
This feature is so important for the speaker’s durability and the quality of sound from the speakers.
Normally, you would think that every manufacturer implements the information on the label, but you would be mistaken.
Most companies that sell speakers don’t include the frequency curve in the specification details.
Since there’s no information about the frequency response, you can check more in-depth online to find reliable reviews.
Generally, a good frequency response is about 80 dB SPL level without messing too much with the entire frequency spectrum.
Also, a good frequency response is when the sound matches the human ear and has a good range from 20 Hz to 20 kHz.
The speakers that use an extension of their frequency response will allow you to catch the song’s last instrumental part.
The importance of frequency response
Because speakers must reproduce many complex sounds at different frequencies, the frequency response is significant for the quality of the sound.
The best speakers on the market must have a great frequency response. Not just speakers, the feature also applies to headphones, amplifiers, microphones, headphones, etc.
If the frequency response is not in the range of 20 Hz and 20 kHz, you will not be able to hear the sound properly. Also, if the frequency response is turned off, there is no sound.
What is a Flat Frequency Response?
In the case of an ideal frequency response, the input and output signals are equal. This means that there is no room for adjustment.
The original source keeps the same treble, middle, and bass volume level. This occurrence is known as a “flat” frequency response.
The peaks and downfalls of the frequency response allow the sound to vary, sometimes louder and sometimes quieter.
Flat-response speakers are the most preferred choice for artists and producers who spend a lot of time mixing and creating music.
Flat-response speakers
The best speakers on the market (IMO) are the ones that have a flat response.
They can be found in every music studio and can be more expensive.
These speakers have a frequency range between 20 Hz to 20 kHz and are specifically designed for a controlled environment.
In a home ambient, the flat-response speakers will not operate to their full potential because of the ambient noise.
Bookshelf speakers
The bookshelf speakers are specifically designed for home use. The companies consider the noises in the room and tweak the speakers’ sound.
These speakers don’t have a flat response and add more color to the sound.
Almost all brands like to play by the rules and produce speakers with an audio frequency range between 20 Hz and 20 kHz.
The companies also closely monitor the preferable bass levels, sensitivity, stereo sound, and more.
Conclusion
What frequency response is good for speakers? The best frequency response for high-quality speakers is between 20 Hz and 20 000 Hz.
Your job now is to find the perfect speakers, put some slow blues on, and enjoy!
Endless hours of experimentation, professional work, and personal investment in Home Theatre, Hi-Fi, Smart Home Automation and Headphones have come to this.
Former owner of Headphones Canada, a high-end headphone specialty retailer.