Getting optimal sound quality can be a problem if you don’t know how to set up a record player.
Audio specialists spend countless hours studying and testing all the parts you need to set a turntable that works brilliantly and can be extended down the road. Let’s learn what they have found.
How to Set up a Record Player in Easiest Steps
Everything you need to know about choosing, setting up, and maintaining a turntable is right here. Be careful as you go through each stage of this how to set up a record player guide to achieving the best result. Here are some record player setup ideas:
Read More: How to Connect Airpods to Apple TV?[Quick Guide]
1. Arrange a Good Place
Now that you’ve invested, place your new record player receiver on a firm surface. The vibration will cause an irritating hum if it’s on an unsteady or slanted table, which can ruin your music.
If your furniture isn’t as sturdy as you’d like, consider purchasing some inexpensive isolation feet to stick to the bottom of your deck to absorb any annoying vibrations. For more noise reduction, a plate mat should be considered.
2. Balance Your Tonearm
The tonearm balance is the toughest and most critical component of the setup because every turntable is different. After that, here are the fundamentals. Attach the belt, the platter to the spindle, and the headshell if you haven’t previously. If it isn’t already there, you’ll need to attach the counterweight on the rear end of the tonearm, which is normally done by screwing it on.
Set the anti-skate dial to 0 beside the tonearm. This creates a slight push that prevents the tonearm from naturally sliding toad the record’s center. Move the tonearm into place above the platter while gently supporting the headshell.
Adjust the rear of the tonearm’s counterbalance, generally by turning it, until the tonearm can float on its own, parallel to the platter’s surface. It has a monitoring weight of 0g at this time. The stylus’s weight is measured to determine how much force is applied to it.
Latest News: Dirac X boAT: Immersive Sound Experience To All boATheads?
3. Hook All the Cables Up
For connecting to stereo speakers, many decks come with RCA or phono cables with red and white connectors on end. You may require a phono-to-3.5mm jack connection to utilize a smaller, fully-featured speaker. Dig through the instructions one more; we won’t tell anybody.
4. Make Sure the Right Speed
Make sure you’re running the record at the right pace; if you go too slow, it’ll sound like the battery is dying. Most 12-inch discs need 33 RPM, but most 7-inch discs require 45 RPM.
The speed of certain older 10-inch records is 78 RPM. These can only be played on three-speed turntables. This is unlikely to be a problem unless you have a music library from before the 1960s.
Other News: Amazon Prime Music Is Due to See a Price Hike!
Conclusion
If you are done with every step of this, how to set up a record player guide, you now have a record player setup living room. Simply turn the record back on, lay your record on the platter, and choose the appropriate speed setting.
(Image Credit: audio-technica)
Slava is a man of mystery and no-one seems to know exactly where he is at any point in time. When he isn't enjoying writing about all things audio and technical he can be found researching his next project of interest. The man never rests.